Hydraulic valveHCZFD2 Hydraulic valve

Designed for hydraulic braking systems of construction machinery;

 Features a spool valve design for smooth, stepless pressure control throughout the pressure range;

The dual-circuit brake valve has two independent pressure outlets for separate front and rear brake control. If one circuit fails, the other remains operational;

Can be used with an accumulator and charging valve to provide service braking and emergency power-cutoff braking in open-center, closed-center, and load-sensing hydraulic circuits;

Alarm switch: SW1/SW2;

Connector: Deutsch DT04-2P;

Alarm switch pressure: 0.5 MPa (normally open);

Max. operating voltage: 36 VDC; max. operating current: 1 A;

Protection rating: IP68; cable length: 200 mm.